www.deenergize.com Home » Lockout Resources » Energy Source Reference » Electrical Energy Sources

Electrical Energy Sources

Electrical Energy Source

Definition of Electrical Energy

Electrical energy is a type of kinetic energy that can be described as the flow of power or charges along a conductor. Most industrial equipment subject to OSHA 1910.147 will have at least one electrical energy source. To do useful work, industrial equipment often converts electrical energy into other forms of kinetic or potential energy.

Associated Electrical Energy Hazards

Per OSHA, there are hundreds of deaths annually due to improper handling of electrical energy. Direct hazards vary from mild electrical shock, all the way to arc flash, and arc blast.

Injuries associated with electrical energy generally consist of four main types as follows:

Use of proper PPE and insulated tools greatly reduces the risk of injury due to contact with electrical energy. Proper lockout/tagout can virtually eliminate the risk of contact with electrical energy.

Means of Electrical Energy Isolation

Electrical energy must be controlled via a mechanical energy isolating device that physically prevents the transmission or release of energy. The use of control logic such as emergency stop buttons or gate interlocks is not an acceptable form of energy isolation.

Verifying Absence of Electrical Energy

Verifying the absence of electrical energy after performing lockout/tagout can be done by attempting to operate the associated components and by observing the associated indicators. It is also a good practice to use a voltmeter and verify that there is no power by observing zero voltage in the associated circuits.

NOTE: When using a voltmeter, always approach the task as if the circuit was energized.

Typical Electrical Energy Isolation Devices

Electrical energy isolation devices may vary in design and configuration. The most common types are:

Typical Electrical Energy Lockout Devices

Electrical energy lockout devices use positive means such as a lock and key to keep the associated energy isolation device in the safe (disconnected) position and prevent equipment energization. Typical electrical energy lockout devices are outlined in the Electrical page.

 

Title: Electrical Energy Sources
URL: http://www.deenergize.com/?target=Electrical_Energy_Sources
Printed: Tuesday October 4th, 2022

Copyright © 2022 St. Claire, Inc.
DEenergize is a trademark of St. Claire, Inc.