Group Lock Box (PSL-GLBN)

The Group Lock Box is used to reduce the amount of hardware needed when multiple authorized employees need to perform group Lockout/Tagout, while maintaining a high level of safety and security.

Here are some of the key features of The Group Lock Box:

• Exclusive tamper-resistant, sliding-lid design keeps keys from being accessed until the last padlock is removed to provide safety and security of employees and equipment.
• The Group Lock Box can hold 12 padlocks on the lid and one padlock on the latch, accommodating up to 13 employees during group Lockout Procedures.
• Constructed of heavy-duty powder-coated steel, the group lock box is rust-resistant and delivers maximum durability.
• Using a group lock box during Group Lockout/Tagout can significantly reduce the amount of padlocks necessary and also the weight of padlocks on each energy source.
• Dimensions are 9.00" (228.6 mm) Wide x 6" (152.4 mm) High x 3.25" (82.6 mm) Deep
• How to use a group lock box:
1. Supervising authorized employee applies his padlocks in order to isolate every energy source on a piece of equipment.
2. Supervising authorized employee puts all of his padlock keys in the group lock box and a final padlock on the front latch.
3. Every other authorized employee applies his padlock to the group lock box. Hasps may be used if more than 13 authorized employees are performing group Lockout/Tagout.
4. The locked-out piece of equipment will remain in a zero-energy state until every authorized employee has removed his padlock from the group lock box so that the supervising authorized employee can remove his initial padlocks from the energy sources.

Group Lock Box - Open

Additional Information:

• PSL-GLBN Group Lock Box Customer Drawing (106K PDF)

Related Lockout Devices:

• Group Lock Box (PSL-GLBN)

Title: Group Lock Box (PSL-GLBN)
URL: http://www.deenergize.com/?target=Group_Lock_Box_(PSL-GLBN)
Printed: Tuesday April 16th, 2024

Copyright © 2024 St. Claire, Inc.
DEenergize is a trademark of St. Claire, Inc.